Sofirn C8G XHP35 (2020) review
The Sofirn C8G XHP35 (C8GXHP35) released in 2020. It uses Cree XHP35 HI LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 80000 cd intensity, and a beam distance of 566 m.
The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Sofirn C8G XHP35 (C8GXHP35) specifications
- C8G XHP35
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 163 g
- 150 mm
- Head diameter
- 44.6 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of C8G XHP35 manufactured by Cree, a US-based LED manufacturing company. The C8G XHP35 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP35 HI LED
- Color temperature
- 6000 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2000 lm
- 80000 cd
- 566 m
- CD/LM factor
The C8G XHP35 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the C8G XHP35 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The C8G XHP35 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The C8G XHP35 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
The performance of the Sofirn C8G XHP35 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Sofirn C8G XHP35, then don’t hesite and signal the problem to us.
Sofirn C8G XHP35 (C8GXHP35) pictures
If there’s information about the Sofirn C8G XHP35 that you would like to see on this site, then write to us.