Skilhunt M300 XHP35 HI (2020) review
The Skilhunt M300 XHP35 HI (M300XHP35HI) released in 2020. It uses Cree XHP35 HI LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1700 lm output, 21500 cd intensity, and a beam distance of 293 m.
This light has 8 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The M300 XHP35 HI flashlight is rechargeable easily via USB port.
Table of contents:
Skilhunt M300 XHP35 HI (M300XHP35HI) specifications
- Brand
- Skilhunt
- Name
- M300 XHP35 HI
- Type
- M300XHP35HI
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 72.5 g
- Length
- 111 mm
- Body diameter
- 23 mm
- Head diameter
- 28 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of M300 XHP35 HI manufactured by Cree, a US-based LED manufacturing company. The M300 XHP35 HI has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 5000 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1700 lm
- Intensity
- 21500 cd
- Throw
- 293 m
- CD/LM factor
- 12.65
Software
The M300 XHP35 HI has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The M300 XHP35 HI is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 8 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The M300 XHP35 HI is magnetic so that the flashlight can be attached to some metallic surfaces.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
Accessories
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- clip
lanyard
magnetic USB charger cable
spare o-ring
The performance of the Skilhunt M300 XHP35 HI flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Skilhunt M300 XHP35 HI, then don’t hesite and signal the problem to us.
Skilhunt M300 XHP35 HI (M300XHP35HI) pictures
If there’s information about the Skilhunt M300 XHP35 HI that you would like to see on this site, then write to us.