Skilhunt E3A (2020) review
The Skilhunt E3A (E3A) released in 2020. It uses Samsung LH351B LED, TIR reflector and 1 x AAA battery. The powerful emitter in this flashlight provides up to 100 lm output, 350 cd intensity, and a beam distance of 37 m.
It uses a TIR lens to form the beam pattern. This light does not have memory function.
Table of contents:
Skilhunt E3A (E3A) specifications
- Brand
- Skilhunt
- Name
- E3A
- Type
- E3A
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 7.5 g
- Length
- 59.5 mm
- Body diameter
- 12.8 mm
- Head diameter
- 14 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
blue
red
slate blue
System
A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Samsung LH351B LED
- Color temperature
- 4000 K, 5000 K, 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- twisty
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 100 lm
- Intensity
- 350 cd
- Throw
- 37 m
- CD/LM factor
- 3.5
Software
- Modes
- 1 mode
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The E3A cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 1 x AAA battery
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your E3A.
- Package contents
- AAA battery
key ring
spare o-ring
The performance of the Skilhunt E3A flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Skilhunt E3A, then don’t hesite and signal the problem to us.
Skilhunt E3A (E3A) pictures
If there’s information about the Skilhunt E3A that you would like to see on this site, then write to our webmaster@flashlightchart.com address.