Seeknite ST01 (2020) review
The Seeknite ST01 (ST01) released in 2020. It uses Cree XP-L HI LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1200 lm output, 20000 cd intensity, and a beam distance of 283 m.
This light has 4 modes of lighting. This light does not have memory function. The ST01 flashlight is rechargeable easily via USB port.
Table of contents:
Seeknite ST01 (ST01) specifications
- Brand
- Seeknite
- Name
- ST01
- Type
- ST01
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 121 g
- Length
- 130 mm
- Head diameter
- 26.3 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of ST01 manufactured by Cree, a US-based LED manufacturing company. The ST01 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-L HI LED
- Color temperature
- 5000 K, 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1200 lm
- Intensity
- 20000 cd
- Throw
- 283 m
- CD/LM factor
- 16.67
Software
It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The lanyard prevents accidental loss of the flashlight.
- Package contents
- lanyard
magnetic USB charger cable
The performance of the Seeknite ST01 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Seeknite ST01, then don’t hesite and signal the problem to us.
Seeknite ST01 (ST01) pictures
If there’s information about the Seeknite ST01 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.