Rofis R3 (2018) review
The Rofis R3 (R3) released in 2018. It uses Cree XP-L2 U3 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1250 lm output, 9410 cd intensity, and a beam distance of 194 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The R3 flashlight is rechargeable easily via USB port.
Table of contents:
Rofis R3 (R3) specifications
- Brand
- Rofis
- Name
- R3
- Type
- R3
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 70.9 g
- Length
- 121.8 mm
- Body diameter
- 22.7 mm
- Head diameter
- 24.5 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of R3 manufactured by Cree, a US-based LED manufacturing company. The R3 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-L2 U3 LED
- Color temperature
- 5000 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1250 lm
- Intensity
- 9410 cd
- Throw
- 194 m
- CD/LM factor
- 7.53
Software
The R3 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The R3 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. The R3 is magnetic so that the flashlight can be attached to some metallic surfaces.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
- Specials
- adjustable head
Accessories
It comes with a battery. The battery must be fully charged before you first use your R3. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
clip
headband
lanyard
magnetic USB charger cable
spare o-ring
The performance of the Rofis R3 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Rofis R3, then don’t hesite and signal the problem to us.
Rofis R3 (R3) pictures
If there’s information about the Rofis R3 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.