Olight Javelot Pro (2019) review
The Olight Javelot Pro (JAVPRO) released in 2019. It uses Cree XHP35 HI LED, SMO reflector and 2 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 2100 lm output, 291600 cd intensity, and a beam distance of 1080 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The Javelot Pro flashlight is rechargeable easily via USB port.
Table of contents:
Olight Javelot Pro (JAVPRO) specifications
- Javelot Pro
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 380 g
- 247 mm
- Body diameter
- 26 mm
- Head diameter
- 63 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of Javelot Pro manufactured by Cree, a US-based LED manufacturing company. The Javelot Pro has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XHP35 HI LED
- Color temperature
- 4000 K
- AR coated glass
- electronic side, electronic rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2100 lm
- 291600 cd
- 1080 m
- CD/LM factor
The Javelot Pro has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 2 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- magnetic USB
- Thermal regulation
- AUX LEDs
The package includes a holster to safely store your flashlight.
- Package contents
- MCC5V magnetic USB charger cable
The performance of the Olight Javelot Pro flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Olight Javelot Pro, then don’t hesite and signal the problem to us.
Olight Javelot Pro (JAVPRO) pictures
If there’s information about the Olight Javelot Pro that you would like to see on this site, then write to our firstname.lastname@example.org address.