Odepro HEX62 (2020) review
The Odepro HEX62 (HEX62) released in 2020. It uses Cree XM-L2 U4 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 7600 cd intensity, and a beam distance of 174 m.
This light has 3 modes of lighting. This light does not have memory function. The HEX62 flashlight is rechargeable easily via USB port.
Table of contents:
Odepro HEX62 (HEX62) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 110 g
- 134 mm
- Body diameter
- 26.5 mm
- Head diameter
- 26.5 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of HEX62 manufactured by Cree, a US-based LED manufacturing company. The HEX62 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XM-L2 U4 LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1000 lm
- 7600 cd
- 174 m
- CD/LM factor
It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 3 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The performance of the Odepro HEX62 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Odepro HEX62, then don’t hesite and signal the problem to us.
Odepro HEX62 (HEX62) pictures
If there’s information about the Odepro HEX62 that you would like to see on this site, then write to our email@example.com address.