Nitecore TM06S (2017) review
The Nitecore TM06S (TM06S) released in 2017. It uses 4 x Cree XM-L2 U3 LEDs, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 4000 lm output, 32300 cd intensity, and a beam distance of 359 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Nitecore TM06S (TM06S) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 266 g
- 117 mm
- Head diameter
- 50 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TM06S manufactured by Cree, a US-based LED manufacturing company. The TM06S has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- 4 x Cree XM-L2 U3 LEDs
- Color temperature
- 6000 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 4000 lm
- 32300 cd
- 359 m
- CD/LM factor
The TM06S has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TM06S is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The TM06S cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 4 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
The performance of the Nitecore TM06S flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore TM06S, then don’t hesite and signal the problem to us.
Nitecore TM06S (TM06S) pictures
If there’s information about the Nitecore TM06S that you would like to see on this site, then write to us.