FlashlightChart.com / Flashlights / Nitecore / Nitecore Tini (2017)

Nitecore Tini (2017) review

2017
Cree XP-G2 S3 LED
380 lm output
1020 cd intensity
integrated 280 mAh Li-Ion battery

The Nitecore Tini (TINI) released in 2017. It uses Cree XP-G2 S3 LED, SMO reflector and integrated 280 mAh Li-Ion battery. The powerful emitter in this flashlight provides up to 380 lm output, 1020 cd intensity, and a beam distance of 64 m.

This light has 4 modes of lighting. This light does not have memory function. The Tini flashlight is rechargeable easily via USB port.

Table of contents:

Nitecore Tini (TINI) specifications

Brand
Nitecore
Name
Tini
Type
TINI
Rating
Rated 3/5 based on 117 user votes.
Thanks for rating!
Invalid rating.
Launch
2017
Form
flashlight

Body

Weight
13.4 g
Length
43.3 mm
Head diameter
25.4 mm
Material
copper
Colors
black
blue
gold
gray
green
red
silver

System

The emitter of Tini manufactured by Cree, a US-based LED manufacturing company. The Tini has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.

Emitter
Cree XP-G2 S3 LED
Color temperature
6500 K
Reflector
SMO
Lens
textured plastic
Switch
dual electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
380 lm
Intensity
1020 cd
Throw
64 m
CD/LM factor
2.68

Software

Modes
4 modes
Mode memory
no
Ramping mode
no
Strobe
no
SOS/Beacon
no

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery
integrated 280 mAh Li-Ion battery
Battery indicator
yes
Charger port
microUSB
LVP
yes
Thermal regulation
yes
Protection
IP54
Impact resistance
1 m
AUX LEDs
no
Magnetic
no

Accessories

Package contents
key ring

The performance of the Nitecore Tini flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore Tini, then don’t hesite and signal the problem to us.

Nitecore Tini (TINI) pictures

If there’s information about the Nitecore Tini that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information