FlashlightChart.com
Nitecore

Nitecore Tini SS (2018) review

2018
Cree XP-G2 S3 LED
380 lm output
1020 cd intensity
integrated 280 mAh Li-Ion battery

The Nitecore Tini SS (TINISS) released in 2018. It uses Cree XP-G2 S3 LED, SMO reflector and integrated 280 mAh Li-Ion battery. The powerful emitter in this flashlight provides up to 380 lm output, 1020 cd intensity, and a beam distance of 64 m.

This light has 4 modes of lighting. This light does not have memory function. The Tini SS flashlight is rechargeable easily via USB port.

Table of contents:

Nitecore Tini SS (TINISS) specifications

BrandNitecore
NameTini SS
TypeTINISS
Rating
Rated 4/5 based on 1009 user votes.
Launch2018
Formflashlight

Body

Weight21.5 g
Length43.3 mm
Head diameter25.4 mm
Materialstainless steel
Colorsblack
glacier
tropical

System

The emitter of Tini SS manufactured by Cree, a US-based LED manufacturing company. The Tini SS has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.

EmitterCree XP-G2 S3 LED
Color temperature6500 K
ReflectorSMO
Lenstextured plastic
Switchdual electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux380 lm
Intensity1020 cd
Throw64 m
CD/LM factor2.68

Software

Modes4 modes
Mode memoryno
Ramping modeno
Strobeno
SOS/Beaconno

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Batteryintegrated 280 mAh Li-Ion battery
Battery indicatoryes
Charger portmicroUSB
LVPyes
Thermal regulationyes
ProtectionIP54
Impact resistance1 m
AUX LEDsno
Magneticno

Accessories

Package contentskeyring

The performance of the Nitecore Tini SS flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore Tini SS, then don’t hesite and signal the problem to us.

Nitecore Tini SS (TINISS) pictures

Nitecore Tini SS / TINISS photo Nitecore Tini SS / TINISS photo
Nitecore Tini SS / TINISS

Nitecore Tini SS (TINISS) comparisons

According to our statistics, the Nitecore Tini SS flashlight was most often compared on our site with the following flashlights.

Wuben T70
Wuben T70
vs Nitecore Tini SS
Nitecore Tini SS
Imalent HR70
Imalent HR70
vs Nitecore Tini SS
Nitecore Tini SS
Rofis MR30
Rofis MR30
vs Nitecore Tini SS
Nitecore Tini SS
Acebeam X70
Acebeam X70
vs Nitecore Tini SS
Nitecore Tini SS

If there’s information about the Nitecore Tini SS that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Nitecore / Nitecore Tini SS (2018)
Back to Top