Nitecore Tini 2 (2020) review

2 x Osram P8 LEDs
500 lm output
2000 cd intensity
integrated 280 mAh Li-Ion battery

The Nitecore Tini 2 (TINI2) released in 2020. It uses 2 x Osram P8 LEDs, TIR reflector and integrated 280 mAh Li-Ion battery. The powerful emitter in this flashlight provides up to 500 lm output, 2000 cd intensity, and a beam distance of 89 m.

It uses a TIR lens to form the beam pattern. This light has 5 modes of lighting. This light does not have memory function. The Tini 2 flashlight is rechargeable easily via USB port.

Table of contents:

Nitecore Tini 2 (TINI2) specifications

NameTini 2
Rated 3/5 based on 998 user votes.


The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight18.8 g
Length46.6 mm
Head diameter12.5 mm
Materialaluminium alloy with HAIII hard-anodized finish


The emitter of Tini 2 manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter2 x Osram P8 LEDs
Color temperature6500 K
Switchdual electronic side


The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux500 lm
Intensity2000 cd
Throw89 m
CD/LM factor4


Modes5 modes
Mode memoryno
Ramping modeno


The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Batteryintegrated 280 mAh Li-Ion battery
Battery indicatoryes
Charger portUSB Type-C
Thermal regulationyes
Impact resistance1 m
SpecialsOLED display


Package contentskey clasp

The performance of the Nitecore Tini 2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore Tini 2, then don’t hesite and signal the problem to us.

Nitecore Tini 2 (TINI2) pictures

Nitecore Tini 2 / TINI2 photo Nitecore Tini 2 / TINI2 photo Nitecore Tini 2 / TINI2 photo Nitecore Tini 2 / TINI2 photo
Nitecore Tini 2 / TINI2

Nitecore Tini 2 (TINI2) comparisons

According to our statistics, the Nitecore Tini 2 flashlight was most often compared on our site with the following flashlights.

Nitecore TIP 2
Nitecore TIP 2
vs Nitecore Tini 2
Nitecore Tini 2
Fenix E03R
Fenix E03R
vs Nitecore Tini 2
Nitecore Tini 2

If there’s information about the Nitecore Tini 2 that you would like to see on this site, then write to us.

FlashlightChart.com / Flashlights / Nitecore / Nitecore Tini 2 (2020)
Back to Top