Nitecore Tiki (2019) review
The Nitecore Tiki (TIKI) released in 2019. It uses Osram P8 LED, TIR reflector and integrated Li-Ion battery. The powerful emitter in this flashlight provides up to 300 lm output, 1260 cd intensity, and a beam distance of 71 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. This light does not have memory function. The Tiki flashlight is rechargeable easily via USB port.
Table of contents:
Nitecore Tiki (TIKI) specifications
- Brand
- Nitecore
- Name
- Tiki
- Type
- TIKI
- Rating
- Launch
- 2019
- Form
- flashlight
Body
- Weight
- 12 g
- Length
- 55 mm
- Head diameter
- 14.7 mm
- Material
- polycarbonate
- Colors
- transparent
System
The emitter of Tiki manufactured by Osram, a German lighting manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- Osram P8 LED
- Color temperature
- 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 300 lm
- Intensity
- 1260 cd
- Throw
- 71 m
- CD/LM factor
- 4.2
Software
- Modes
- 4 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature. It has auxiliary LEDs which make it really nice looking.
- Battery
- integrated Li-Ion battery
- Battery indicator
- no
- Charger port
- microUSB
- LVP
- yes
- Thermal regulation
- no
- Protection
- IP66
- Impact resistance
- 1 m
- AUX LEDs
- yes
- Magnetic
- no
- Specials
- UV light
high CRI light
white light
The performance of the Nitecore Tiki flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore Tiki, then don’t hesite and signal the problem to us.
Nitecore Tiki (TIKI) pictures
If there’s information about the Nitecore Tiki that you would like to see on this site, then write to our webmaster@flashlightchart.com address.