Nitecore MH27 (2016) review
The Nitecore MH27 (MH27) released in 2016. It uses Cree XP-L HI V3 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 53500 cd intensity, and a beam distance of 463 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The MH27 flashlight is rechargeable easily via USB port.
Table of contents:
Nitecore MH27 (MH27) specifications
- Brand
- Nitecore
- Name
- MH27
- Type
- MH27
- Rating
- Launch
- 2016
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 170 g
- Length
- 154 mm
- Head diameter
- 40 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of MH27 manufactured by Cree, a US-based LED manufacturing company. The MH27 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-L HI V3 LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- dual electronic side, mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1000 lm
- Intensity
- 53500 cd
- Throw
- 463 m
- CD/LM factor
- 53.5
Software
The MH27 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MH27 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- no
- Charger port
- microUSB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- yes
- Magnetic
- no
- Specials
- blue light
green light
red light
white light
Accessories
The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- clip
lanyard
microUSB cable
nylon holster
spare USB plug
spare o-ring
spare rubber cover
tactical ring
The performance of the Nitecore MH27 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Nitecore MH27, then don’t hesite and signal the problem to us.
Nitecore MH27 (MH27) pictures
If there’s information about the Nitecore MH27 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.