FlashlightChart.com / Flashlights / Meote / Meote FM1 Copper LHD351 (2020)

Meote FM1 Copper LHD351 (2020) review

2020
4 x Samsung LH351D NW LEDs
4980 lm output
8500 cd intensity
1 x 18650 Li-Ion battery

The Meote FM1 Copper LHD351 (FM1CLH) released in 2020. It uses 4 x Samsung LH351D NW LEDs, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 4980 lm output, 8500 cd intensity, and a beam distance of 184 m.

It uses a TIR lens to form the beam pattern. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Meote FM1 Copper LHD351 (FM1CLH) specifications

Brand
Meote
Name
FM1 Copper LHD351
Type
FM1CLH
Rating
Rated 4/5 based on 162 user votes.
Thanks for rating!
Invalid rating.
Launch
2020
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
144 g
Length
108.6 mm
Body diameter
21.9 mm
Head diameter
30 mm
Material
copper head, aluminium alloy body with HAIII hard-anodized finish
Colors
black
blue
sand

System

A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
4 x Samsung LH351D NW LEDs
Color temperature
5000 K
Reflector
TIR
Lens
TIR
Switch
electronic rear

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
4980 lm
Intensity
8500 cd
Throw
184 m
CD/LM factor
1.71

Software

The FM1 Copper LHD351 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the FM1 Copper LHD351 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The FM1 Copper LHD351 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Firmware
Anduril
Mode memory
yes
Ramping mode
yes
Strobe
yes
SOS/Beacon
yes

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. The FM1 Copper LHD351 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking.

Battery
1 x 18650 Li-Ion battery
Battery indicator
yes
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IPx7
AUX LEDs
yes
Magnetic
no

Accessories

The package includes a holster to safely store your flashlight.

Package contents
nylon holster
spare o-ring

The performance of the Meote FM1 Copper LHD351 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Meote FM1 Copper LHD351, then don’t hesite and signal the problem to us.

Meote FM1 Copper LHD351 (FM1CLH) pictures

If there’s information about the Meote FM1 Copper LHD351 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information