Mecarmy PT60 (2016) review
The Mecarmy PT60 (PT60) released in 2016. It uses 16 x Cree XP-G2 LEDs, TIR reflector and 4 x 18650 Li-Ion battery pack. The powerful emitter in this flashlight provides up to 9600 lm output, 43238 cd intensity, and a beam distance of 416 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The PT60 flashlight is rechargeable easily via USB port.
Table of contents:
Mecarmy PT60 (PT60) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 450 g
- 124 mm
- Body diameter
- 52 mm
- Head diameter
- 75 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of PT60 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 16 x Cree XP-G2 LEDs
- Color temperature
- 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 9600 lm
- 43238 cd
- 416 m
- CD/LM factor
The PT60 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The PT60 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The PT60 flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- 4 x 18650 Li-Ion battery pack
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- powerbank function
It comes with a battery. The battery must be fully charged before you first use your PT60. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 4 x 18650 battery pack
The performance of the Mecarmy PT60 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Mecarmy PT60, then don’t hesite and signal the problem to us.
Mecarmy PT60 (PT60) pictures
If there’s information about the Mecarmy PT60 that you would like to see on this site, then write to our email@example.com address.