Mateminco TK01 (2018) review
The Mateminco TK01 (TK01) released in 2018. It uses Cree XHP50.2 LED, OP reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 2215 lm output, 23870 cd intensity, and a beam distance of 309 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The TK01 flashlight is rechargeable easily via USB port.
Table of contents:
Mateminco TK01 (TK01) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 191 g
- 144.1 mm
- Head diameter
- 37.4 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TK01 manufactured by Cree, a US-based LED manufacturing company. The TK01 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Cree XHP50.2 LED
- Color temperature
- 6500 K
- AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2215 lm
- 23870 cd
- 309 m
- CD/LM factor
The TK01 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TK01 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 adapter
2 x spare o-rings
spare rubber cover
The performance of the Mateminco TK01 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Mateminco TK01, then don’t hesite and signal the problem to us.
Mateminco TK01 (TK01) pictures
If there’s information about the Mateminco TK01 that you would like to see on this site, then write to our email@example.com address.