
Mateminco MT07 SST20 (2019) review
The Mateminco MT07 SST20 (MT07SST20) released in 2019. It uses 7 x Luminus SST20 LEDs, TIR reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 5500 lm output, 43000 cd intensity, and a beam distance of 415 m.
It uses a TIR lens to form the beam pattern. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The MT07 SST20 flashlight is rechargeable easily via USB port.
Table of contents:
Mateminco MT07 SST20 (MT07SST20) specifications
- Brand
- Mateminco
- Name
- MT07 SST20
- Type
- MT07SST20
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 168 g
- Length
- 111 mm
- Body diameter
- 34 mm
- Head diameter
- 44 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
gun gray
olive green
sand
silver
System
The emitter of MT07 SST20 manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Emitter
- 7 x Luminus SST20 LEDs
- Color temperature
- 4000 K, 5000 K, 6500 K
- Reflector
- TIR
- Lens
- TIR
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 5500 lm
- Intensity
- 43000 cd
- Throw
- 415 m
- CD/LM factor
- 7.82
- CRI
- 95
Software
The MT07 SST20 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the MT07 SST20 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The MT07 SST20 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Firmware
- Anduril
- Mode memory
- yes
- Ramping mode
- yes
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking.
- Battery
- 1 x 26650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx7
- AUX LEDs
- yes
- Magnetic
- no
Accessories
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 adapter
2 x spare o-rings
21700 adapter
lanyard
The performance of the Mateminco MT07 SST20 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Mateminco MT07 SST20, then don’t hesite and signal the problem to us.
Mateminco MT07 SST20 (MT07SST20) pictures

If there’s information about the Mateminco MT07 SST20 that you would like to see on this site, then write to us.