
Manker T01s (2019) review
The Manker T01s (T01S) released in 2019. It uses Cree XP-L HI LED, SMO reflector and 1 x 14500 Li-Ion or 1 x AA NiMH battery. The powerful emitter in this flashlight provides up to 800 lm output, 13320 cd intensity, and a beam distance of 231 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode.
Table of contents:
Manker T01s (T01S) specifications
- Brand
- Manker
- Name
- T01s
- Type
- T01S
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 75 g
- Length
- 105 mm
- Head diameter
- 35 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
champagne
System
The emitter of T01s manufactured by Cree, a US-based LED manufacturing company. The T01s has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-L HI LED
- Color temperature
- 4500 K, 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 800 lm
- Intensity
- 13320 cd
- Throw
- 231 m
- CD/LM factor
- 16.65
Software
The T01s has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The T01s cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.
- Battery
- 1 x 14500 Li-Ion or 1 x AA NiMH battery
- Battery indicator
- no
- Charger port
- no
- LVP
- no
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- clip
lanyard
spare o-ring
The performance of the Manker T01s flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker T01s, then don’t hesite and signal the problem to us.
Manker T01s (T01S) pictures

If there’s information about the Manker T01s that you would like to see on this site, then write to us.