Manker MK35 II (2020) review
The Manker MK35 II (MK35II) released in 2020. It uses Luminus SBT90.2 LED, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 6000 lm output, 1000000 cd intensity, and a beam distance of 2000 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The MK35 II flashlight is rechargeable easily via USB port.
Table of contents:
Manker MK35 II (MK35II) specifications
- Brand
- Manker
- Name
- MK35 II
- Type
- MK35II
- Rating
- Launch
- 2020
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 737 g
- Length
- 185 mm
- Body diameter
- 53 mm
- Head diameter
- 109 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of MK35 II manufactured by Luminus, a US-based LED manufacturer. The MK35 II has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Luminus SBT90.2 LED
- Color temperature
- 5000 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 6000 lm
- Intensity
- 1000000 cd
- Throw
- 2000 m
- CD/LM factor
- 166.67
Software
The MK35 II has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The MK35 II is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The MK35 II flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- Battery
- 4 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- USB Type-C
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
- Specials
- powerbank function
Accessories
- Package contents
- USB Type-C OTG cable
USB Type-C cable
shoulder strap
spare o-ring
The performance of the Manker MK35 II flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Manker MK35 II, then don’t hesite and signal the problem to us.
Manker MK35 II (MK35II) pictures
If there’s information about the Manker MK35 II that you would like to see on this site, then write to us.