FlashlightChart.com / Flashlights / Maglite / Maglite ML300LX 3D (2019)

Maglite ML300LX 3D (2019) review

2019
Cree XM-L2 LED
746 lm output
40596 cd intensity
3 x D cell batteries

The Maglite ML300LX 3D (ML300LX3D) released in 2019. It uses Cree XM-L2 LED, SMO reflector and 3 x D cell batteries. The powerful emitter in this flashlight provides up to 746 lm output, 40596 cd intensity, and a beam distance of 403 m.

This light has 3 modes of lighting. This light does not have memory function.

Table of contents:

Maglite ML300LX 3D (ML300LX3D) specifications

Brand
Maglite
Name
ML300LX 3D
Type
ML300LX3D
Rating
Rated 4/5 based on 147 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Length
298.5 mm
Body diameter
38.1 mm
Head diameter
57 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
gray
green

System

The emitter of ML300LX 3D manufactured by Cree, a US-based LED manufacturing company. The ML300LX 3D has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better.

Emitter
Cree XM-L2 LED
Reflector
SMO
Lens
polycarbonate
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
746 lm
Intensity
40596 cd
Throw
403 m
CD/LM factor
54.42

Software

Modes
3 modes
Mode memory
no
Ramping mode
no
Strobe
no
SOS/Beacon
no

Features

The ML300LX 3D cannot charge batteries directly. You may need an external charger to keep your battery going. A protected battery is recommended as the light itself does not have low voltage protection (LVP). This light does not have temperature control feature.

Battery
3 x D cell batteries
Battery indicator
no
Charger port
no
LVP
no
Thermal regulation
no
Protection
IPx4
AUX LEDs
no
Magnetic
no

The performance of the Maglite ML300LX 3D flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Maglite ML300LX 3D, then don’t hesite and signal the problem to us.

Maglite ML300LX 3D (ML300LX3D) pictures

If there’s information about the Maglite ML300LX 3D that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information