
Klarus XT11GT (2019) review
The Klarus XT11GT (XT11GT) released in 2019. It uses Cree XHP35 HD LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2000 lm output, 24964 cd intensity, and a beam distance of 316 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The XT11GT flashlight is rechargeable easily via USB port.
Table of contents:
Klarus XT11GT (XT11GT) specifications
- Brand
- Klarus
- Name
- XT11GT
- Type
- XT11GT
- Rating
- Launch
- 2019
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 130 g
- Length
- 142.6 mm
- Body diameter
- 25.4 mm
- Head diameter
- 34.9 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
camo
System
The emitter of XT11GT manufactured by Cree, a US-based LED manufacturing company. The XT11GT has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HD LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- electronic side, mechanical rear, mode pedal rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2000 lm
- Intensity
- 24964 cd
- Throw
- 316 m
- CD/LM factor
- 12.48
Software
The XT11GT has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The XT11GT is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- Modes
- 4 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- yes
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- microUSB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your XT11GT. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
lanyard
microUSB cable
nylon holster
spare o-ring
The performance of the Klarus XT11GT flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Klarus XT11GT, then don’t hesite and signal the problem to us.
Klarus XT11GT (XT11GT) pictures

If there’s information about the Klarus XT11GT that you would like to see on this site, then write to us.