
Imalent HR70 (2018) review
The Imalent HR70 (HR70) released in 2018. It uses Cree XHP70.2 LED, OP reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 3000 lm output, 5960 cd intensity, and a beam distance of 154 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The HR70 flashlight is rechargeable easily via USB port.
Table of contents:
Imalent HR70 (HR70) specifications
- Brand
- Imalent
- Name
- HR70
- Type
- HR70
- Rating
- Launch
- 2018
- Form
- headlamp
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 50 g
- Length
- 103 mm
- Body diameter
- 21.3 mm
- Head diameter
- 26 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of HR70 manufactured by Cree, a US-based LED manufacturing company. The HR70 has an orange peel (OP) textured reflector. Orange peel reflectors have smoother beams. It has an AR coated lens.
- Emitter
- Cree XHP70.2 LED
- Color temperature
- 6500 K
- Reflector
- OP
- Lens
- toughtened AR coated glass
- Switch
- electronic front
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 3000 lm
- Intensity
- 5960 cd
- Throw
- 154 m
- CD/LM factor
- 1.99
Software
The HR70 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- Modes
- 5 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- no
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The HR70 is magnetic so that the flashlight can be attached to some metallic surfaces.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- yes
- Charger port
- magnetic USB
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- yes
Accessories
It comes with a battery. The battery must be fully charged before you first use your HR70. The clip is useful to keep the light secured in your pocket.
- Package contents
- 18650 battery
2 x spare o-rings
clip
headband
magnetic USB charger cable
The performance of the Imalent HR70 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Imalent HR70, then don’t hesite and signal the problem to us.
Imalent HR70 (HR70) pictures

If there’s information about the Imalent HR70 that you would like to see on this site, then write to us.