Folomov Camp D4 (2018) review
The Folomov Camp D4 (CAMPD4) released in 2018. It uses Cree XP-L V6 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1080 lm output, 7600 cd intensity, and a beam distance of 174 m.
This light has 3 modes of lighting. This light does not have memory function. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Folomov Camp D4 (CAMPD4) specifications
- Brand
- Folomov
- Name
- Camp D4
- Type
- CAMPD4
- Rating
- Launch
- 2018
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 65 g
- Length
- 112 mm
- Head diameter
- 25.4 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of Camp D4 manufactured by Cree, a US-based LED manufacturing company. The Camp D4 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XP-L V6 LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 1080 lm
- Intensity
- 7600 cd
- Throw
- 174 m
- CD/LM factor
- 7.04
Software
The Camp D4 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 3 modes
- Mode memory
- no
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The Camp D4 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. This light does not have temperature control feature.
- Battery
- 1 x 18650 Li-Ion battery
- Battery indicator
- no
- Charger port
- no
- LVP
- yes
- Thermal regulation
- no
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
It comes with a battery. The battery must be fully charged before you first use your Camp D4. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
clip
lanyard
The performance of the Folomov Camp D4 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Folomov Camp D4, then don’t hesite and signal the problem to us.
Folomov Camp D4 (CAMPD4) pictures
If there’s information about the Folomov Camp D4 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.