Fenix TK22 v2 (2019) review
The Fenix TK22 v2 (TK22V2) released in 2019. It uses Luminus SST40 LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this flashlight provides up to 1600 lm output, 41133 cd intensity, and a beam distance of 406 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Fenix TK22 v2 (TK22V2) specifications
- TK22 v2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 150 g
- 150 mm
- Body diameter
- 25.4 mm
- Head diameter
- 40 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TK22 v2 manufactured by Luminus, a US-based LED manufacturer. The TK22 v2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Luminus SST40 LED
- Color temperature
- 6500 K
- AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1600 lm
- 41133 cd
- 406 m
- CD/LM factor
The TK22 v2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The TK22 v2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The TK22 v2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The package includes a holster to safely store your flashlight. The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 adapter
The performance of the Fenix TK22 v2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix TK22 v2, then don’t hesite and signal the problem to us.
Fenix TK22 v2 (TK22V2) pictures
If there’s information about the Fenix TK22 v2 that you would like to see on this site, then write to our firstname.lastname@example.org address.