Fenix TK20R (2016) review
The Fenix TK20R (TK20R) released in 2016. It uses Cree XP-L HI V3 LED, SMO reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 1000 lm output, 24000 cd intensity, and a beam distance of 310 m.
This light has 4 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The TK20R flashlight is rechargeable easily via USB port.
Table of contents:
Fenix TK20R (TK20R) specifications
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 141 g
- 151.5 mm
- Body diameter
- 25 mm
- Head diameter
- 34 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of TK20R manufactured by Cree, a US-based LED manufacturing company. The TK20R has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Cree XP-L HI V3 LED
- Color temperature
- 5800 K
- toughtened AR coated glass
- electronic side, mechanical rear
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 1000 lm
- 24000 cd
- 310 m
- CD/LM factor
The TK20R has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again.
- 4 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your TK20R. The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 18650 battery
The performance of the Fenix TK20R flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Fenix TK20R, then don’t hesite and signal the problem to us.
Fenix TK20R (TK20R) pictures
If there’s information about the Fenix TK20R that you would like to see on this site, then write to our email@example.com address.