FlashlightChart.com / Flashlights / Emisar / Emisar D4V2 SST20 95CRI (2019)

Emisar D4V2 SST20 95CRI (2019) review

2019
8 x Luminus SST20 LEDs
3000 lm output
18500 cd intensity
1 x 18650 Li-Ion battery

The Emisar D4V2 SST20 95CRI (D4V2 SST2095CRI) released in 2019. It uses 8 x Luminus SST20 LEDs, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this flashlight provides up to 3000 lm output, 18500 cd intensity, and a beam distance of 272 m.

It uses a TIR lens to form the beam pattern. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.

Table of contents:

Emisar D4V2 SST20 95CRI (D4V2 SST2095CRI) specifications

Brand
Emisar
Name
D4V2 SST20 95CRI
Type
D4V2 SST2095CRI
Rating
Rated 4/5 based on 148 user votes.
Thanks for rating!
Invalid rating.
Launch
2019
Form
flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.

Weight
75 g
Length
95.5 mm
Body diameter
25.4 mm
Head diameter
28 mm
Material
aluminium alloy with HAIII hard-anodized finish
Colors
black
gray
sand
titanium

System

The emitter of D4V2 SST20 95CRI manufactured by Luminus, a US-based LED manufacturer. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.

Emitter
8 x Luminus SST20 LEDs
Color temperature
4000 K
Reflector
TIR
Lens
TIR
Switch
electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux
3000 lm
Intensity
18500 cd
Throw
272 m
CD/LM factor
6.17
CRI
95

Software

The D4V2 SST20 95CRI has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the D4V2 SST20 95CRI is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The D4V2 SST20 95CRI is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Firmware
Anduril
Mode memory
yes
Ramping mode
yes
Strobe
yes
SOS/Beacon
yes

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. The D4V2 SST20 95CRI cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking. The D4V2 SST20 95CRI is magnetic so that the flashlight can be attached to some metallic surfaces.

Battery
1 x 18650 Li-Ion battery
Battery indicator
yes
Charger port
no
LVP
yes
Thermal regulation
yes
Protection
IP67
AUX LEDs
yes
Magnetic
yes

Accessories

The clip is useful to keep the light secured in your pocket. The lanyard prevents accidental loss of the flashlight.

Package contents
clip
lanyard
spare o-ring

The performance of the Emisar D4V2 SST20 95CRI flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Emisar D4V2 SST20 95CRI, then don’t hesite and signal the problem to us.

Emisar D4V2 SST20 95CRI (D4V2 SST2095CRI) pictures

If there’s information about the Emisar D4V2 SST20 95CRI that you would like to see on this site, then write to our webmaster@flashlightchart.com address.

Back to Top
This website uses cookies which are small data files that it creates and stores on your computer. If you use this website, you agree with our cookies policy. More information