DQG Tiny 26650 3rd XPG2 (2017) review
The DQG Tiny 26650 3rd XPG2 (TINY266503RDXPG2) released in 2017. It uses 7 x Cree XP-G2 LEDs, TIR reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 2500 lm output, 18100 cd intensity, and a beam distance of 269 m.
It uses a TIR lens to form the beam pattern. This light has 4 modes of lighting. This light does not have memory function.
Table of contents:
DQG Tiny 26650 3rd XPG2 (TINY266503RDXPG2) specifications
- Tiny 26650 3rd XPG2
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 92.4 g
- 92 mm
- Head diameter
- 33 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of Tiny 26650 3rd XPG2 manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- 7 x Cree XP-G2 LEDs
- Color temperature
- 5000 K, 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2500 lm
- 18100 cd
- 269 m
- CD/LM factor
- 4 modes
- Mode memory
- Ramping mode
The Tiny 26650 3rd XPG2 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking.
- 1 x 26650 Li-Ion battery
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
- Package contents
- 2 x spare o-rings
The performance of the DQG Tiny 26650 3rd XPG2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the DQG Tiny 26650 3rd XPG2, then don’t hesite and signal the problem to us.
DQG Tiny 26650 3rd XPG2 (TINY266503RDXPG2) pictures
If there’s information about the DQG Tiny 26650 3rd XPG2 that you would like to see on this site, then write to our email@example.com address.