Astrolux EA01S XHP50.2 (2021) review

2021

Cree XHP50.2 LED

11000 lm output

36481 cd intensity

1 x 26650 Li-Ion battery

The Astrolux EA01S XHP50.2 (EA01SXHP502) released in 2021. It uses Cree XHP50.2 LED, SMO reflector and 1 x 26650 Li-Ion battery. The powerful emitter in this flashlight provides up to 11000 lm output, 36481 cd intensity, and a beam distance of 382 m.

The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The EA01S XHP50.2 flashlight is rechargeable easily via USB port.

Table of contents:

Astrolux EA01S XHP50.2 specifications
Astrolux EA01S XHP50.2 pictures
Astrolux EA01S XHP50.2 comparisons

Astrolux EA01S XHP50.2 (EA01SXHP502) specifications

Brand	Astrolux
Name	EA01S XHP50.2
Type	EA01SXHP502
Rating	★★★★★ Rated 3/5 based on 773 user votes.
Launch	2021
Form	flashlight

Body

The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.

Weight	151 g
Length	116 mm
Body diameter	34 mm
Head diameter	41 mm
Material	aluminium alloy with HAIII hard-anodized finish
Colors	black blue gray

System

The emitter of EA01S XHP50.2 manufactured by Cree, a US-based LED manufacturing company. The EA01S XHP50.2 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.

Emitter	Cree XHP50.2 LED
Color temperature	6500 K
Reflector	SMO
Lens	toughtened AR coated glass
Switch	electronic side

Performance

The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.

Flux	11000 lm
Intensity	36481 cd
Throw	382 m
CD/LM factor	3.32

Software

The EA01S XHP50.2 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The ramping mode of the EA01S XHP50.2 is intuitive, and lets you seamlessly ramp the output up and down over almost the entire output range. The EA01S XHP50.2 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.

Firmware	Anduril
Mode memory	yes
Ramping mode	yes
Strobe	yes
SOS/Beacon	yes

Features

The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.

Battery	1 x 26650 Li-Ion battery
Battery indicator	yes
Charger port	USB Type-C
LVP	yes
Thermal regulation	yes
Protection	IPx7
Impact resistance	1 m
AUX LEDs	no
Magnetic	no

Accessories

The lanyard prevents accidental loss of the flashlight.

Package contents	2 x spare o-rings 26350 body tube USB Type-C cable lanyard

The performance of the Astrolux EA01S XHP50.2 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.

The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Astrolux EA01S XHP50.2, then don’t hesite and signal the problem to us.