Armytek Wizard Pro USB (2017) review
The Armytek Wizard Pro USB (WIZPROU) released in 2017. It uses Cree XHP50 LED, TIR reflector and 1 x 18650 Li-Ion battery. The powerful emitter in this headlamp provides up to 2300 lm output, 4225 cd intensity, and a beam distance of 130 m.
It uses a TIR lens to form the beam pattern. This light has 8 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available. The Wizard Pro USB flashlight is rechargeable easily via USB port.
Table of contents:
Armytek Wizard Pro USB (WIZPROU) specifications
- Wizard Pro USB
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 65 g
- 108 mm
- Body diameter
- 24.5 mm
- Head diameter
- 29 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of Wizard Pro USB manufactured by Cree, a US-based LED manufacturing company. A TIR lens works on the principle of total internal reflection. The TIR lens collimates the LED light into efficient, well-controlled light beams that maximize the usable lumens in the target area.
- Cree XHP50 LED
- Color temperature
- 5000 K, 6500 K
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 2300 lm
- 4225 cd
- 130 m
- CD/LM factor
The Wizard Pro USB has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The Wizard Pro USB is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 8 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. The Wizard Pro USB is magnetic so that the flashlight can be attached to some metallic surfaces.
- 1 x 18650 Li-Ion battery
- Battery indicator
- Charger port
- magnetic USB
- Thermal regulation
- AUX LEDs
It comes with a battery. The battery must be fully charged before you first use your Wizard Pro USB. The clip is useful to keep the light secured in your pocket.
- Package contents
- 18650 battery
2 x spare o-rings
magnetic USB charger cable
The performance of the Armytek Wizard Pro USB flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Armytek Wizard Pro USB, then don’t hesite and signal the problem to us.
Armytek Wizard Pro USB (WIZPROU) pictures
If there’s information about the Armytek Wizard Pro USB that you would like to see on this site, then write to us.