
Acebeam K70 (2016) review
The Acebeam K70 (K70) released in 2016. It uses Cree XHP35 HI LED, SMO reflector and 4 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 2600 lm output, 422000 cd intensity, and a beam distance of 1299 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Acebeam K70 (K70) specifications
- Brand
- Acebeam
- Name
- K70
- Type
- K70
- Rating
- Launch
- 2016
- Form
- flashlight
Body
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive finish.
- Weight
- 590 g
- Length
- 206 mm
- Body diameter
- 50 mm
- Head diameter
- 88 mm
- Material
- aluminium alloy with HAIII hard-anodized finish
- Colors
- black
System
The emitter of K70 manufactured by Cree, a US-based LED manufacturing company. The K70 has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Emitter
- Cree XHP35 HI LED
- Color temperature
- 6500 K
- Reflector
- SMO
- Lens
- toughtened AR coated glass
- Switch
- mechanical rear
Performance
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- Flux
- 2600 lm
- Intensity
- 422000 cd
- Throw
- 1299 m
- CD/LM factor
- 162.31
Software
The K70 has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The K70 is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- Modes
- 6 modes
- Mode memory
- yes
- Ramping mode
- no
- Strobe
- yes
- SOS/Beacon
- no
Features
The battery indicator lets you know when the battery is low, charging, or fully charged. The K70 cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- Battery
- 4 x 18650 Li-Ion batteries
- Battery indicator
- yes
- Charger port
- no
- LVP
- yes
- Thermal regulation
- yes
- Protection
- IPx8
- AUX LEDs
- no
- Magnetic
- no
Accessories
The package includes a holster to safely store your flashlight. The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
lanyard
nylon holster
spare rubber cover
The performance of the Acebeam K70 flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam K70, then don’t hesite and signal the problem to us.
Acebeam K70 (K70) pictures

If there’s information about the Acebeam K70 that you would like to see on this site, then write to our webmaster@flashlightchart.com address.