Acebeam K30 GT (2020) review
The Acebeam K30 GT (K30GT) released in 2020. It uses Luminus SBT90.2 LED, SMO reflector and 3 x 18650 Li-Ion batteries. The powerful emitter in this flashlight provides up to 5500 lm output, 262144 cd intensity, and a beam distance of 1024 m.
This light has 5 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. It has a strobe function, which is one of the most effective self defense tools available.
Table of contents:
Acebeam K30 GT (K30GT) specifications
- K30 GT
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 336 g
- 155.5 mm
- Body diameter
- 44.5 mm
- Head diameter
- 57 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of K30 GT manufactured by Luminus, a US-based LED manufacturer. The K30 GT has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- Luminus SBT90.2 LED
- Color temperature
- 5700 K
- toughtened AR coated glass
- electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 5500 lm
- 262144 cd
- 1024 m
- CD/LM factor
The K30 GT has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. The K30 GT is tactical strobe ready. The strobe light is disorienting to the person it is aimed at which makes it difficult for them to concentrate.
- 5 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. The K30 GT cannot charge batteries directly. You may need an external charger to keep your battery going. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating.
- 3 x 18650 Li-Ion batteries
- Battery indicator
- Charger port
- Thermal regulation
- AUX LEDs
The lanyard prevents accidental loss of the flashlight.
- Package contents
- 2 x spare o-rings
The performance of the Acebeam K30 GT flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam K30 GT, then don’t hesite and signal the problem to us.
Acebeam K30 GT (K30GT) pictures
If there’s information about the Acebeam K30 GT that you would like to see on this site, then write to us.