Acebeam H30 R+CRI (2018) review
The Acebeam H30 R+CRI (H30RCRI) released in 2018. It uses 1 x Cree XHP70.2 LED, 1 x Cree XP-E2 R2 LED, 1 x Nichia 219C LED, SMO reflector and 1 x 21700 Li-Ion battery. The powerful emitter in this headlamp provides up to 4000 lm output, 7300 cd intensity, and a beam distance of 171 m.
This light has 6 modes of lighting. The memory function is a nice feature, the light will remember the last used mode. The H30 R+CRI flashlight is rechargeable easily via USB port.
Table of contents:
Acebeam H30 R+CRI (H30RCRI) specifications
- H30 R+CRI
The aluminium body of flashlight treated with a Type III hard-anodized, anti-abrasive ﬁnish.
- 80 g
- 89.4 mm
- Head diameter
- 29 mm
- aluminium alloy with HAIII hard-anodized finish
The emitter of H30 R+CRI manufactured by Cree, a US-based LED manufacturing company. The emitter of H30 R+CRI manufactured by Nichia, a Japanese LED manufacturer. The H30 R+CRI has a smooth reflector. The properly focused smooth reflector gives you a more cohesive hotspot and therefore throws better. It has an AR coated lens.
- 1 x Cree XHP70.2 LED, 1 x Cree XP-E2 R2 LED, 1 x Nichia 219C LED
- Color temperature
- 6500 K
- toughtened AR coated glass
- dual electronic side
The throw is the calculated distance in meters at which the flashlight produces a light intensity of 0.25 lux. The candela per lumen (cd/lm) ratio can be used to determine if a flashlight has a spot or flood type beam. Well-focused spot beams can be over 100 cd/lm, tactical flashlights are typically between 20-100 cd/lm, and work lights are less than 10 cd/lm.
- 4000 lm
- 7300 cd
- 171 m
- CD/LM factor
The H30 R+CRI has mode memory. Mode memory means that the light will remember the mode you were using when the light was last turned off, and when you turn it on again. It has the SOS beacon function for an emergency situation. The SOS flashes Morse code so you can signal for help when needed.
- 6 modes
- Mode memory
- Ramping mode
The battery indicator lets you know when the battery is low, charging, or fully charged. This flashlight can charge the battery with an integrated charger, and it works with any USB power source. This flashlight has a built-in low voltage protection (LVP) to prevent damage to the cell from over-discharge, so protected cells are not necessary. The built-in thermal control automatically adjusts brightness output to prevent overheating. It has auxiliary LEDs which make it really nice looking. The H30 R+CRI flashlight can be used as a powerbank to recharge a device, such as a mobile phone.
- 1 x 21700 Li-Ion battery
- Battery indicator
- Charger port
- USB Type-C
- Thermal regulation
- AUX LEDs
- high CRI light
It comes with a battery. The battery must be fully charged before you first use your H30 R+CRI.
- Package contents
- 18650 adapter
2 x spare o-rings
two way USB Type-C cable
The performance of the Acebeam H30 R+CRI flashlight is measured according to the ANSI / NEMA FL1 Standard 30 seconds after switching the light on. The ANSI/NEMA FL1 2009 Standard is a set of flashlight performance guidelines.
The specifications above are based on the official data published by the manufacturer, but we also take user reviews into consideration. If you found an error or something lacking in the specifications above for the Acebeam H30 R+CRI, then don’t hesite and signal the problem to us.
Acebeam H30 R+CRI (H30RCRI) pictures
If there’s information about the Acebeam H30 R+CRI that you would like to see on this site, then write to us.